Balboa

Balboa Temp Sensor 30352 is a 96" long 2 wire 2 pin connector sensor with bulb that is 2" in length and 3/8" in diameter. This sensor is used for 1000LE, 2000LE and Value balboa systems that are not...

Transformer Assembly 120 Volts 30274-1 Features: Balboa 120V 9-pin connector for duplex systems Replacement transformer assembly For Duplex model circuit board with 110V input supply Also a...

Balboa Temp Sensor 30674 Features: Balboa M7 SMT 12" cord Stick-on sensor Also found in use on Cal Spa XL systems.

»» Description: Balboa Suv Circuit Board ...

Balboa SPST Pressure Switch 30409 Features: Single Pole Single Throw (SPST) PSI - 1 Amps - 3 NPT Threads - 1/8"

Balboa SPST Pressure Switch 30408 Features: Single Pole Single Throw (SPST) PSI - 2 Amps - 3 NPT Threads - 1/8"

Balboa Sensor Mount 52560 can also be used on non-M7 ™, Value, LE, and SUV. Features: Balboa mount Compatible with Balboa M7 heater probes Sensor Application: Spa Control Sensor Type:...

»» Description: Balboa Sensor Assembly Balboa Sensor Assembly is a combination of two sensors, a temperature sensor which reads the water temperature in the spa and a high limit sensor which...

Balboa Sensor Mount 30388 Features: Balboa mount Compatible with all 3/8" diameter temp probes 1-13/16" long Accommodates 3/8 & No.34; Temperature Sensors From Balboa, Gecko, Hydro Quip And...

»» Description: Balboa Spa Side Digital Duplex Panel Balboa Spa Side Digital Duplex Panel hot tub topside fits the GS500, 500Z, 501, 501Z, Duplex control systems. »» Application: Outdoor »»...

»» Description: Balboa Spa Ozone Up To 1000 Gallons Balboa Spa Ozone Up To 1000 Gallons comes with a 4 pin amp connector for jobsite installation into any configured receptical. It can be wired...

»» Description: Balboa Sensor Assembly Balboa Sensor Assembly is a combination of two sensors, a temperature sensor which reads the water temperature in the spa and a high limit sensor which...